The CPLT caboose is almost ready

The Camino, Placerville and Lake Tahoe caboose is really shaping up. All the iron work is going onto the body. The steps are major achievement by our woodworkers. Roof catwalks, interior ladder, end wall grab irons and end deck handrails are next. 

Note ladder guards in place. We need an  additional retainer to pull guard in tight. The lettering will be white. 

Now we're ready to build a complete train on the track, couple it to a steam locomotive and run east to El Dorado, just 9 miles from this location at Shingle Springs.

Progress on the CPLT caboose

The Camino, Placerville and Lake Tahoe Railroad caboose project team has been very busy, making use of the dry fall months. The project is in the final completion phase, leading to raising the car body up on the wheel trucks. The major projects have included the installation of roof flashing, installation of the metal roof and installing the cupola windows and wall siding.

A caboose does not make a good boat, the cupola is mostly windows and the cupola wall is single sided. This lends itself to being a challenge to weather seal around the base of the cupola and windows. A quality roofing job was completed by Mott Roofing, with great detail made to flashing the cupola walls to main roof, and insuring a good drip edge around the car body.

The metal roofing is an exact match to the original metal roofing. Completing the roofing ahead of the rains was quite a relief. Other projects have included finishing the freight door hardware, and weather stripping the freight doors using re-purposed cloth fire hose. New drip guards were also fabricated to prevent water dripping down behind the freight doors.

Other metal work included making up new exterior wall retaining straps, roof catwalk supports, freight door latches, and cupola window retaining hooks. All existing metalwork was carefully stripped, repaired, and painted leading to installation. Current work is underway to install new wood/steel bolsters in the wheel trucks, finish installation of exterior grab irons, and develop a lifting plan to raise the car body.

All wood team, metal team, support team, and external professionals are thanked for their untiring contribution to bring El Dorado County's only in county built and operated caboose back to operational status.

Journal boxes on CPLT caboose trucks

Those old trucks in the Camino, Placerville and Lake Tahoe Caboose No. 2 are coming along:

CPLT caboose ready for painting

Here's a note from Keith Berry:

The Camino, Placerville, and Lake Tahoe caboose will be primed and painted over the next two weeks. The exterior will be a dark green, as determined form original paint chips. Once painted, the grab irons will be bolted onto the car. The cupola and freight doors remain to be completed. The wheel trucks are a current focus to insure they are ready when the car body is completed.

All volunteers working on El Dorado County's only home built-home and operated caboose are to be thanked for their efforts, time and determination to recreate this piece of local history.

As a side note, we have recently received a photograph showing the caboose at Camino after being significantly damaged from collision with an unknown source. Thanks to this event, the caboose was not sold to another railroad once the CPLT began using a diesel locomotive, which led to the caboose being stripped of its trucks, couplers and air brake equipment.

Thankfully, it was sold to a private party in Camino, then to another private party in Shingle Springs for a kids playhouse. The collision saved the caboose and (indirectly) led to it's donation to the museum, and now it's recreation on the El Dorado Western Railroad. Another photograph shows a much bolder white lettering on the sides and above the entry doors on each end.

Progress on the CPLT caboose rebuild

These images show the progress on the standard gauge Camino, Placerville and Lake Tahoe Caboose No. 2. El Dorado County's only home-built and operated caboose, is now being re-constructed at the Freight Station in Shingle Springs.


The caboose is being reconstructed at Shingle Springs. It's El Dorado County's only caboose (to our knowledge), having been built in 1930s from parts of an earlier boxcar caboose. The project is going very well. The car is being built over the track to allow for setting on wheel trucks when ready.

The wood working crew on the El Dorado Western Railroad. These are the type of guy's that worked in the car shop for Mich-Cal Lumber Company at Camino and the California Door Company at Diamond Springs. The kind of guy's who converted a boxcar into a passenger/freight car for the CP&LT around 1900, and then took it apart and built it into a proper caboose that ran until the 1950s.

CPLT caboose relocated to Shingle Springs

The Camino, Placerville and Lake Tahoe caboose, which sat on a panel track in front of the El Dorado County Historical Museum for nearly 20 years, has been relocated to Shingle Springs. In recent months a renovation crew dismantled the caboose and moved timbers and hardware components to a storage container.

The panel track at the county museum will be moved to Shingle Springs and re-assembled for the CP and LT caboose re-build. 

The next step for the county museum is to look at options for the newly vacated space, according to museum administrator Mary Cory. She said the Museum Commission will "dust off" the development plan for museum yard as they look for an appropriate use of the space.

Two crews of craftsmen have begun the slow process of rebuilding the caboose next to the Southern Pacific freight shed at Shingle Springs. The center sills and wheel trucks were moved to Shingle Springs last week. A group of metal workers began preparing the sills for painting. They will fabricate the missing handrails, cut lever and ladder. The five members of the expert woodworking crew are preparing new wood beams for instillation.

Restoration has begun!

Ready to begin CPLT caboose rebuild

The renovation crew for the Camino, Placerville and Lake Tahoe Railroad Caboose No. 2 last week took the last step before beginning the rebuild. The main beams were removed from the caboose frame and transported to the rebuild site in Shingle Springs. Once lumber and hardware is purchased, the rebuild phase of renovation will begin.


Here's a photograph of the caboose in its glory days on the CPLT. The eight-mile short line owned several cabooses, "one at a time," according to Steve Polkinghorn. "The short one, which was also the last one, was wrecked in 1950, after which one was leased from the Southern Pacific. The diesel locomotive was light enough so that no fireman was needed in the cab, unless a caboose was used." Once the CPLT No. 101 (a GE 44-tonner) was placed in service in July 1953, the railroad cancelled the SP lease and operated without a caboose until the railroad ceased operation.



The renovation crew loads one of the four main beans to the caboose into a trailer last Tuesday. They were transported to Shingle Springs and placed in storage until the lumber arrives for the rebuild. The caboose was located at the El Dorado County Historical Museum for almost 20 years.  Once it's rebuilt, the caboose will operate on the El Dorado Western Railroad, along with the Southern Pacific caboose No. 1094.

This picture was taken by Harry Critchfield. Harry is one of the photographers for  the El Dorado Western Railway Foundation.



Renovation of CPLT Caboose No. 2

Over the past several months, the crew of the El Dorado Western Railway Foundation began the renovation process on the Camino, Placerville and Lake Tahoe Railroad Caboose No. 2. Due to the poor condition of the wood structure on the caboose, it will be necessary to completely rebuild the caboose from the trucks up to the cupola. The hardware will be saved and reused where possible.

All the major pieces of the wood structure are being saved for the time being. They will be used as patterns to help the crew measure and cut timbers for the rebuilt caboose. Where possible, timbers in good condition will be used to build interior benches.

This picture shows the steel cupola frame on top of the caboose. Last Tuesday, November 6, 2012, the crew lowered the frame into the interior of the caboose. Volunteers first removed the walls and ceiling from the frame. Then they dislodged the frame from the roof of the caboose. The next step was to slide two 2x6 timbers under the frame to support it. The interior ceiling joists were next removed (one was completely rotted away on the right side).

Homer Rail steps onto the ladder after the crew positioned the cupola frame for the drop into the caboose interior.

It took five minutes to lower the cupola frame into the interior of the caboose. Two 4x4 pieces of timer were used as slides. Ron Sexton used come-a-long to pull the frame down the slice. Homer (out of the picture) and Bill Rodgers guided the frame from the roof.

Ron gives an enthusiastic thumbs up as the cupola frame comes to a rest on the inside of the caboose while Homer (standing next to Ron) and foundation president Keith Berry look on..

Bill coils a rope at the end of the work session last Tuesday. On Wednesday, the crew completely removed the caboose structure.